Inside Stepper Card

 Inside Stepper Card.  This is a Cricut file (and Almost Crafters Companion template Violet 23). I couldn’t get the CC template to stand up with the directions they gave, and had to slightly adjust the folds on the stepper piece. …  

Full instructions for both at the end of the photos. 

 Plain base file   https://design.cricut.com/landing/project-detail/668b3fb8f175291067188fe5

I
On the cricut screen, grey indicates a patterned card stock… but naturally you can use anything.   You’ll need a score tool and fine point blade… 
Design link for Halloween card.
https://design.cricut.com/landing/project-detail/66c50629a925d33af3756e44

Front Of Halloween Card.

Directions








 

Now it’s time to decorate as desired.  

If any instructions are unclear, please email me so I can add to, or fix. 
LucineSmith@icloud.com

 

Halloween Book Card… Cricut file or Template.  5 x 7.  This is the Cricut version. 

Cricut file… https://design.cricut.com/landing/project-detail/64fe3165545da7d30d1a31a3

Instructions.

This version above was done with a template and dies… the smaller template (5 x 5) and most of the dies are from Crafters Companion.  The template is found in the Template library, Violet set, #14. 

They are put together the same. 

10 x 7  Save as a png file print out exact size at 10 x 7. 

Small Diamond Fold Card

 This card is both a cricut file and a printable … or use the printable file as a template. 

Cricut links…base only…free to cut. https://design.cricut.com/landing/project-detail/64715250b7579243612889b1

With panels and flamingo https://design.cricut.com/landing/project-detail/64715ac3b757924361288b02

Instructions on folding the card first…templates and printables at the end. 

1. Cut out the main piece, one Diamond, and four squares… cut out smaller versions of the Diamond and squares to mat as desired, and go ahead and put the mats together.

 Template/printable… if you want to print, make sure you save the templates as a png file. If you are on a devise like an ipad, you'll need to save to files not photos … the templates are png files, if printed at 300 dpi, they should be the correct size.  Double check the size, however. To do that, I’m including the template with a grid so you can double check, or cut by hand.  You might need to tell your printer to print exact size…  the printable pngs are the next three files.

   The next two files are just photos with the grid marks and dimensions if you want to hand cut. The square mat is just a 2” x 2”.

Feel free to ask questions if you get stuck. 

Scrap Savers Card #2

 Another Cricut card for those of us who hoard scraps… so fun.   I ink all the edges so the random scraps all look like they belong together. The Saying was stamped (crafters companion), but can easily be draw in the panel included in the project.  Made from All free shapes…

I included the inside pieces in separate colors as well as a set in all brown…so you can do one mat at a time or use the brown to do read out in one mat and cut all at once like this…

Spread it out well, and Just use the grid lines to match up.. I’ve found however that it takes more time to do it this way, as it does to use two mats and just keep it going color by color…

But the options are there… note it’s a bit confusing to put it together at first as there’s a tendency to try and put the pieces down at the right angles…use the photo to Kay the black shadow layer..I do the top and bottom piece first, it makes the others easier..

 

Still on a Halloween card kick it’s a nifty Gate Fold Card with a Tag shaped aperture … did two Halloween designs and just the plain base …this one is ‘Trick or Treat’.  I did it with a white base then a black one because I couldn’t decide….the others with links below.  5 x 7.

https://design.cricut.com/landing/project-detail/633253f6fe4e398bbacb9484

 

Note..when cutting the card, the grey colors on the DesignSpace screen, are meant to be cut from printed card stock, not actually grey.

Gate Fold Card ‘Boo Day’

https://design.cricut.com/landing/project-detail/633241d46b00174c4a797f04

And the plain Gate Fold Base. I Try 

to make all my bases free to cut, but the one shape I needed to make the tag opening is an access shape…I’ll try to design a new gatefold base that’s free ASAP.

https://design.cricut.com/landing/project-detail/633241c2d85a80ab0dadea8d